Still Life with Wheelbarrow, Truck and Candelabra

By -

I have no idea what the candelabra was doing there, perched on a half demolished wall in Muntazah, and judging from its very French shrugging posture, it probably didn't know either. Even within the category of 'things you'd miss if you were driving a car', this little tableau was unexpected, to say the least.

If you have lost a candelabra and suspect this might be it, let me know and I'll take the same walk next weekend. If it's still there, I'll retrieve it for you.

Same goes for the wheelbarrow.

Comments

  1. Rupert Neil Bumfrey28 January 2012 at 14:46

    https://plus.google.com/u/0/100146646232137568790/posts/GkuKU4myrPW

    ReplyDelete
  2. Para Glider29 January 2012 at 04:11

    Thanks Rupert - I must find out about this google+ thing. I'm signed up but hardly ever look at it!

    ReplyDelete

Post a Comment

Popular posts from this blog

How to weigh a car using a tape measure and a tyre pressure gauge

By -
There are two pretty good ways to weigh a car: Drive it to the nearest public weighbridge and wait your turn. Look up the manual under General Specifications, ‘kerb weight’ But let's suppose the nearest public weighbridge is fifty miles away and you've lost the manual (and temporarily forgotten how to use public libraries and the Internet) and the burning urge to weigh your car just won't go away- what can you do about it? The good news is, you need hardly any equipment. All you need, for a reasonably accurate result is: a hand-held tyre pressure gauge which can be analogue or digital a retractable steel measuring tape a calculator, pencil and paper, or a good head for mental arithmetic The method Park the car on some clean, level concrete Observe that the car is held up by its four tyres (!) Measure the width of the tread of one tyre: e.g. 6 inches Measure the length of tread in contact with the ground: e.g. 7 inches Work out the area of tread touching the ground: e.g. 6 x
Read more